기기를 수리하세요

수리할 권리

상점

이 안내서에는 최근 변경 사항이 더 있습니다. 최신 비검증 버전으로 전환하십시오.

Hoover Power Path Pro Advanced Power Switch Replacement

작성자 Jose Andres Gonzalez Valdes (또 다른 기여자 3명)
  • 댓글 3
  • 즐겨찾기 0
  • 완료: 4

난이도

어려움

단계

8

소요 시간

20 분

섹션

1

플래그

0

소개

The power switch allows the Hoover Power Path Pro Advanced to turn on with the press of the power button. A defective power switch will not allow the user to control the on and off state of the device and needs to be replaced.

도구

해당 도구 구매

부품

지정된 부품이 없습니다.

  1. Remove the lower brushroll from the bottom of the cleaner.

    • Remove the lower brushroll from the bottom of the cleaner.

    편집

  2. Use a long #2 Philips head to remove the 8 numbered screws on the bottom of the cleaner (They will also be indicated on the bottom of the vacuum).

    • Use a long #2 Philips head to remove the 8 numbered screws on the bottom of the cleaner (They will also be indicated on the bottom of the vacuum).

    편집

  3. Pull the red handle to remove the front suction unit from the cleaner. Pull the red handle to remove the front suction unit from the cleaner.

    • Pull the red handle to remove the front suction unit from the cleaner.

    편집

  4. 필수 도구 키트

    최고의 소형 키트에서 가장 유용한 도구.

    지금 쇼핑하기

    필수 도구 키트

    최고의 소형 키트에서 가장 유용한 도구.

    지금 쇼핑하기

  5. Unscrew the hose by using a Phillips #2 to detach it from the top cover of the cleaner.

    • Unscrew the hose by using a Phillips #2 to detach it from the top cover of the cleaner.

    편집

  6. Push down on the handle release button. Lift the edge of top cover connected to this button. Repeat the above step for the "On/Off" button.

    • Push down on the handle release button. Lift the edge of top cover connected to this button.

    • Repeat the above step for the "On/Off" button.

    • Pull entire top cover off.

    • Caution: when pulling the handle release button, make sure the top of the cleaner does not fall.

    편집

  7. Remove the "On/Off" cap by pulling it upwards with caution.

    • Remove the "On/Off" cap by pulling it upwards with caution.

    편집

  8. Use a long #2 Philips head to remove the two screws from the arched grey piece.

    • Use a long #2 Philips head to remove the two screws from the arched grey piece.

    편집

  9. Pull out the red power the red power switch. Pull out the red power the red power switch.

    • Pull out the red power the red power switch.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

다른 4명이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 3명과 함께

Jose Andres Gonzalez Valdes

회원 가입일: 2018년 01월 22일

676 평판

안내서 5개 작성하였습니다

배지: 7

배지 +4개 더

팀

Cal Poly, Team S16-G5, Banghart Winter 2018 Cal Poly, Team S16-G5, Banghart Winter 2018 회원

CPSU-BANGHART-W18S16G5

5 회원들

안내서 11개 작성하였습니다

댓글 3개

의견 추가하세요

What is the part number?

martahayner - 답글

you have to test the switch, mine tested ok which led me to the fuse between the motor and switch. It was bad, parts warehouse part # 440004065 does the trick.

frank - 답글

댓글 쓰기

조회 통계:

24 시간 전: 2

7일 전: 5

30일 전: 30

전체 시간: 1,697