이 버전에는 잘못된 편집 사항이 있을 수 있습니다. 최신 확인된 스냅샷으로 전환하십시오.
필요한 것
-
이 단계는 번역되지 않았습니다. 번역을 도와주십시오
-
Identify the three screws and using a Phillips #1 screwdriver loosen the the screws.
-
Remove the three screws.
-
-
이 단계는 번역되지 않았습니다. 번역을 도와주십시오
-
Pull the backside of the controller off.
-
The inside of the controller should look like this.
-
The marked area is the battery.
-
-
-
이 단계는 번역되지 않았습니다. 번역을 도와주십시오
-
Using a plastic opening tool, pry the battery off the motherboard.
-
The inside of the controller should look like this.
-
거의 끝나갑니다!
결승점