기기를 수리하세요 커뮤니티 상점

Hover-1 Eagle Throttle/Brake Lever Replacement

소개

This guide will walk you through how to replace a faulty or non-functional throttle or brake lever on a Hover-1 Eagle scooter. You should replace your throttle or brake lever if your lever fails to accelerate or stop the scooter or appears damaged. To determine if you need to replace your throttle or brake lever, refer to our Troubleshooting Guide.

필요한 것

  1. Hover-1 Eagle Throttle/Brake Lever Replacement, Throttle/Brake Lever: 1 단계, 이미지 1/3 Hover-1 Eagle Throttle/Brake Lever Replacement, Throttle/Brake Lever: 1 단계, 이미지 2/3 Hover-1 Eagle Throttle/Brake Lever Replacement, Throttle/Brake Lever: 1 단계, 이미지 3/3

    • Unscrew the scooter handle.

    • The scooter handles are left-handed or reverse threaded, so twist clockwise to remove them.

    편집

  2. Hover-1 Eagle Throttle/Brake Lever Replacement: 2 단계, 이미지 1/3 Hover-1 Eagle Throttle/Brake Lever Replacement: 2 단계, 이미지 2/3 Hover-1 Eagle Throttle/Brake Lever Replacement: 2 단계, 이미지 3/3

    • Push back the fastening clips by wedging the plastic spudger between the clip and the throttle handle.

    • Insert iFixit opening picks between each fastening clip and the throttle handle to prevent re-fastening.

    • Pull the throttle lever off gently by pulling towards you.

    • The spring housed in the handle can sometimes send the lever flying. Maintain a firm grip on the throttle lever.

    편집

  4. Hover-1 Eagle Throttle/Brake Lever Replacement: 3 단계, 이미지 1/3 Hover-1 Eagle Throttle/Brake Lever Replacement: 3 단계, 이미지 2/3 Hover-1 Eagle Throttle/Brake Lever Replacement: 3 단계, 이미지 3/3

    • To reassemble, insert the spring into the placement hole, housed inside the throttle handle. Insert the other end of the spring into the placement hole inside the throttle body housing.

    편집

  5. Hover-1 Eagle Throttle/Brake Lever Replacement: 4 단계, 이미지 1/3 Hover-1 Eagle Throttle/Brake Lever Replacement: 4 단계, 이미지 2/3 Hover-1 Eagle Throttle/Brake Lever Replacement: 4 단계, 이미지 3/3

    • Twist the throttle lever back to its original orientation by rotating it to the left.

    • Apply pressure to the throttle handle until you hear the fastening clips take hold the of the throttle lever.

    • Make sure the throttle lever is fully inserted and flush with the display throttle body.

    편집

  6. Hover-1 Eagle Throttle/Brake Lever Replacement: 5 단계, 이미지 1/3 Hover-1 Eagle Throttle/Brake Lever Replacement: 5 단계, 이미지 2/3 Hover-1 Eagle Throttle/Brake Lever Replacement: 5 단계, 이미지 3/3

    • Reattach the scooter handle.

    • Make sure to twist the handles counterclockwise to tighten.

    편집
결승점

다른 4명이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 4명과 함께

Andrew Gaskell

회원 가입일: 01/23/20

1,008 평판

안내서 5개 작성하였습니다

배지: 10

배지 +7개 더

팀

Cal Poly, Team S1-G2, White Winter 2020 Cal Poly, Team S1-G2, White Winter 2020 회원

CPSU-WHITE-W20S1G2

4 회원들

안내서 6개 작성하였습니다

댓글 24개

Great detail……….. Where can I buy the replacement part (throttle) the company hover1 isn't answering me and they don't have this part on their website. Thanks

hanjna76 - 답글

Im needed a throttle did anyone have any luck?

rodarte_amanda1992 -

Where do I buy the part where do I get it please let me know The brake lever

poorbubbaa - 답글

Necesito acelerador y no lo encuentro.

Josue Villanueva - 답글

I cant squeeze the spudger and the pick between this and the spudger broke…what the!!!

Cheri Rael - 답글

댓글 쓰기

조회 통계:

24 시간 전: 1

7일 전: 9

30일 전: 70

전체 시간: 15,403