기기를 수리하세요 커뮤니티 상점

How to Change the Oil for the Honda EU2200IT A2

소개

This guide shows how to change the engine oil for the Honda EU2200IT generator. This procedure is a prerequisite for many other repairs.

Oil specifications:
SAE 10W-30
0.46 US quarts (0.44 L)

필요한 것

  1. How to Change the Oil for the Honda EU2200IT A2, Honda EU2200IT A2 Safety Precautions: 1 단계, 이미지 1/1

    • Before you begin, make sure the generator is switched off and the generator is cool to the touch.

    편집

  2. How to Change the Oil for the Honda EU2200IT A2, Disconnect the spark plug: 2 단계, 이미지 1/2 How to Change the Oil for the Honda EU2200IT A2, Disconnect the spark plug: 2 단계, 이미지 2/2

    • Lift and remove the spark plug cover.

    편집

  3. How to Change the Oil for the Honda EU2200IT A2: 3 단계, 이미지 1/2 How to Change the Oil for the Honda EU2200IT A2: 3 단계, 이미지 2/2

    • Grab the plastic housing at the end of the spark plug wire.

    • Pull firmly to disconnect the wire from the spark plug.

    편집

  5. How to Change the Oil for the Honda EU2200IT A2, Remove the maintenance cover: 4 단계, 이미지 1/1

    • Use a Phillips #2 screwdriver to loosen the screw holding the maintenance cover in place.

    편집

  6. How to Change the Oil for the Honda EU2200IT A2: 5 단계, 이미지 1/3 How to Change the Oil for the Honda EU2200IT A2: 5 단계, 이미지 2/3 How to Change the Oil for the Honda EU2200IT A2: 5 단계, 이미지 3/3

    • Swing the top of the maintenance cover out.

    • Remove the maintenance cover.

    편집

  7. How to Change the Oil for the Honda EU2200IT A2, Drain the engine oil: 6 단계, 이미지 1/2 How to Change the Oil for the Honda EU2200IT A2, Drain the engine oil: 6 단계, 이미지 2/2

    • Unscrew and remove the oil filler cap.

    편집

  8. How to Change the Oil for the Honda EU2200IT A2: 7 단계, 이미지 1/2 How to Change the Oil for the Honda EU2200IT A2: 7 단계, 이미지 2/2

    • Place an oil pan below the fill port to catch the engine oil.

    • Carefully tilt the generator towards the oil pan to drain the oil.

    편집

  9. How to Change the Oil for the Honda EU2200IT A2: 8 단계, 이미지 1/1

    • During reassembly, be sure to refill the engine oil:

    • If you recently resealed the crankcase cover with liquid sealant, wait at least 20 minutes before adding oil.

    • Use SAE 10W-30 oil, up to 0.46 US quarts.

    • Add oil until the dipstick is almost completely submerged.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

작성자

Arthur Shi

회원 가입일: 01/03/18

253,262 평판

안내서 526개 작성하였습니다

배지: 47

배지 +44개 더

팀

iFixit iFixit 회원

Staff

135 회원들

안내서 17,147개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 1

7일 전: 11

30일 전: 61

전체 시간: 3,509