주요 콘텐츠로 건너뛰기

기기를 고치세요

수리할 권리

부품 & 도구

소개

The Auto Boot feature powers on your laptop as soon as you open the lid, so it must be disabled before undertaking certain repairs. Auto Boot can be found on 2016 (and newer) MacBook Pros and 2017 (and newer) 12" Retina MacBooks.

This guide will walk you through the process of disabling Auto Boot, and then re-enabling it when your repair is complete.

  1. Power on your Mac and launch Terminal. To launch Terminal, you can either use Spotlight Search or navigate to Applications / Utilities in Finder and double click the Terminal icon. To launch Terminal, you can either use Spotlight Search or navigate to Applications / Utilities in Finder and double click the Terminal icon.
    • Power on your Mac and launch Terminal.

    • To launch Terminal, you can either use Spotlight Search or navigate to Applications / Utilities in Finder and double click the Terminal icon.

  2. Copy and paste the following command (or type it exactly) into Terminal: sudo nvram AutoBoot=%00
    • Copy and paste the following command (or type it exactly) into Terminal:

    • sudo nvram AutoBoot=%00

    • Press [return].

    • Your [return] key may also be labeled ⏎ or [enter].

    • If you are prompted for an administrative password, type the password and press [return].

    • Your password will not be displayed in Terminal.

  3. Nintendo Switch 키트

    게임으로 돌아가기 위한 빠른 해결책

    Nintendo Switch 키트 쇼핑하기

    Nintendo Switch 키트

    게임으로 돌아가기 위한 빠른 해결책

    Nintendo Switch 키트 쇼핑하기
  4. You can now safely power down your Mac and remove the bottom case, without it accidentally powering on.
    • You can now safely power down your Mac and remove the bottom case, without it accidentally powering on.

    • Remember, you must still disconnect the battery before servicing internal components.

  5. When your repair is complete and your Mac is successfully reassembled, you can re-enable the Auto Boot feature. Power on your Mac and launch Terminal. Copy and paste the following command (or type it exactly) into Terminal:
    • When your repair is complete and your Mac is successfully reassembled, you can re-enable the Auto Boot feature.

    • Power on your Mac and launch Terminal.

    • Copy and paste the following command (or type it exactly) into Terminal:

    • sudo nvram AutoBoot=%03

    • Press [return].

    • If you are prompted for an administrative password, type the password and press [return].

    • Your password will not be displayed in Terminal.

    • Alternatively, you may reset your Mac's NVRAM to re-enable Auto Boot.

결론

Congrats! You're done.

다른 10명이 해당 안내서를 완성하였습니다.

Jeff Suovanen

회원 가입일: 2013년 08월 06일

301,147 평판

안내서 256개 작성하였습니다

iFixit iFixit 회원

Community

126 회원들

안내서 11,869개 작성하였습니다

hello may i ask, how do u make it Jeff$? mine’s scarlet$ and i want to change it but idk how

srhshahdzan - 답글

I can’t type anything into the terminal…what am I doing wrong?

Linda Sussman - 답글

댓글 쓰기

조회 통계:

24 시간 전: 22

7일 전: 224

30일 전: 912

전체 시간: 12,627