도구

부품

부품은 필요하지 않습니다.

  1. Lay your jacket on a table or flat surface. Spray the jacket with water.
    • Lay your jacket on a table or flat surface.

    • Spray the jacket with water.

  2. US$100 이상 또는 Pro Tech Toolkit을 포함한 모든 주문의 배송은 무료입니다!

    상점 둘러보기
  3. Observe the water. If the water sinks in and absorbs into the material, your jacket is "wetting out" and needs to have the durable water repellent finish reapplied.
    • Observe the water.

    • If the water sinks in and absorbs into the material, your jacket is "wetting out" and needs to have the durable water repellent finish reapplied.

  4. If the water beads up, staying on the outside of the garment like dew drops, your jacket does not need to have the durable water repellent finish reapplied. Water droplets should roll right off of the jacket when you pick it up. Water droplets should roll right off of the jacket when you pick it up.
    • If the water beads up, staying on the outside of the garment like dew drops, your jacket does not need to have the durable water repellent finish reapplied.

    • Water droplets should roll right off of the jacket when you pick it up.

결승점

다른 한 분이 해당 안내서를 완성하였습니다.

iRobot

회원 가입일: 2009년 09월 24일

1 평판

안내서 623개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 1

지난 7일: 5

지난 30일: 31

전체 시간: 1,207