주요 콘텐츠로 건너뛰기

Insignia Flex 8 Battery Replacement

필요한 것

  1. Insignia Flex 8 Battery Replacement, Battery: 1 단계, 이미지 1/1
    • Make sure the power is off to avoid injury in the following steps.

    • Position the tablet so that the screen is face down.

    • The power button is located in the upper left hand corner.

    • Hold the power button for three seconds until the tablet powers down.

  2. Insignia Flex 8 Battery Replacement: 2 단계, 이미지 1/2 Insignia Flex 8 Battery Replacement: 2 단계, 이미지 2/2
    • Remove the back casing by sliding a credit card or a similarly thin but firm object in between the casing and the screen.

    • Run this object around the perimeter of the tablet until there is separation between the casing and the screen.

    • Remove the back casing and set aside.

  3. Insignia Flex 8 Battery Replacement: 3 단계, 이미지 1/1
    • Peel back the tape from battery and case.

  4. Insignia Flex 8 Battery Replacement: 4 단계, 이미지 1/1
    • Slide the spudger beneath battery to pry away it away from the case. Work around the battery, prying up all edges to remove from glue.

    • Do not puncture or bend battery. This could cause battery to leak acid.

  5. Insignia Flex 8 Battery Replacement: 5 단계, 이미지 1/1
    • Desolder the black, yellow and red connections from circuit board. Desoldering Help

    • Keep the soldering tool away from other components on the circuit board.

결론

To reassemble your device, follow these instructions in reverse order.

다른 4명이 해당 안내서를 완성하였습니다.

Tyler Tyrrell

회원 가입일: 03/11/15

890 평판

안내서 4개 작성하였습니다

Colorado Springs, Team 5-5, Panko Spring 2015 Colorado Springs, Team 5-5, Panko Spring 2015 회원

UCCS-PANKO-S15S5G5

3 회원들

안내서 12개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 5

전체 시간: 9,089