기기를 수리하세요 커뮤니티 상점

Jabra Freeway Antenna Replacement

소개

The bluetooth antenna in the Jabra Freeway is what allows the device to connect with your cellular device. This guide will help you to replace the antenna in the event of a failure.

필요한 것

  1. Jabra Freeway Antenna Replacement, Front Panel: 1 단계, 이미지 1/3 Jabra Freeway Antenna Replacement, Front Panel: 1 단계, 이미지 2/3 Jabra Freeway Antenna Replacement, Front Panel: 1 단계, 이미지 3/3

    • Turn off the device before proceeding. Failure to do so may result in device damage or injury to oneself.

    • Remove the rubber pads from the bottom of the device using the spudger.

    편집

  2. Jabra Freeway Antenna Replacement: 2 단계, 이미지 1/3 Jabra Freeway Antenna Replacement: 2 단계, 이미지 2/3 Jabra Freeway Antenna Replacement: 2 단계, 이미지 3/3

    • Remove the eight 6mm T9 screws.

    • Two of these screws are underneath the foam padding. This padding is glued on and will be destroyed in this process. Poking through the foam minimizes the damage to the device.

    편집

  3. Jabra Freeway Antenna Replacement: 3 단계, 이미지 1/3 Jabra Freeway Antenna Replacement: 3 단계, 이미지 2/3 Jabra Freeway Antenna Replacement: 3 단계, 이미지 3/3

    • Gently lift the front panel off of the device and carefully rest it to the side.

    편집

  5. Jabra Freeway Antenna Replacement, Antenna: 4 단계, 이미지 1/2 Jabra Freeway Antenna Replacement, Antenna: 4 단계, 이미지 2/2
    이 단계에 사용된 도구:
    Tweezers
    $4.99
    구매

    • Carefully remove the rubber gasket using the tweezers.

    편집

  6. Jabra Freeway Antenna Replacement: 5 단계, 이미지 1/2 Jabra Freeway Antenna Replacement: 5 단계, 이미지 2/2

    • Remove the five 6mm T6 screws connecting the circuit board to the rear panel.

    편집

  7. Jabra Freeway Antenna Replacement: 6 단계, 이미지 1/3 Jabra Freeway Antenna Replacement: 6 단계, 이미지 2/3 Jabra Freeway Antenna Replacement: 6 단계, 이미지 3/3

    • Remove the microphone from microphone slot using tweezers.

    편집

  8. Jabra Freeway Antenna Replacement: 7 단계, 이미지 1/3 Jabra Freeway Antenna Replacement: 7 단계, 이미지 2/3 Jabra Freeway Antenna Replacement: 7 단계, 이미지 3/3

    • Excessive force may cause the circuit board to break, destroying the device.

    • Carefully use the plastic opening tool to lift the circuit board up.

    • The orange portion of the circuit board is glued into place, and a small amount of force is necessary to break it free from the adhesive.

    편집

  9. Jabra Freeway Antenna Replacement: 8 단계, 이미지 1/2 Jabra Freeway Antenna Replacement: 8 단계, 이미지 2/2

    • Use the tweezers to remove the antenna from the retaining clips.

    편집

  10. Jabra Freeway Antenna Replacement: 9 단계, 이미지 1/1

    • Desolder the antenna wire from the circuit board.

    • Please refer to the soldering technique guide for instructions on desoldering and soldering.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 3명과 함께

Alec Wilson

회원 가입일: 10/19/16

741 평판

안내서 5개 작성하였습니다

배지: 11

배지 +8개 더

팀

UMass Dartmouth, Team 4-8, Catania Fall 2016 UMass Dartmouth, Team 4-8, Catania Fall 2016 회원

UMASSD-CATANIA-F16S4G8

2 회원들

안내서 6개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 4

전체 시간: 813