Back Cover Teardown guide must be used first to get inside the camera. Later, soldering guides will be used.
부품은 필요하지 않습니다.
Remove the two 6.2mm Phillips screws on both sides of camera's back cover.
Remove the two 6.2mm Phillips screws on the bottom back cover of the camera.
Back cover is now unscrewed an can be removed.
Unscrew the 6.2mm Phillips screw next to the viewfinder.
The back cover is now unscrewed. Lift up and pull the cover off evenly.
Desolder the two connections at the top of the flash capacitor.
해당 안내서 퍼가기
해당 안내서를 사이트/포럼에 작은 위젯으로 포함하려면 크기를 선택하고 아래 코드를 복사하십시오.