기기를 수리하세요 커뮤니티 상점

Kurio Motion Speakers Replacement

소개

Does your tablet give out poor sound or does not give sound at all? It is probably time to change your speakers. Refer to this guide to learn how to change your speakers. This will require you to solder so use this guide to help.

필요한 것

  1. Kurio Motion Speakers Replacement, Speakers: 1 단계, 이미지 1/1

    • Use the Phillips #0 Screwdriver to remove four 5mm screws from sides of the device.

    번역하기

  2. Kurio Motion Speakers Replacement: 2 단계, 이미지 1/1

    • Use the Ifixit opening tool to pry open the device to remove the back of the Kurio Motion.

    번역하기

  4. Kurio Motion Speakers Replacement: 3 단계, 이미지 1/1

    • Remove the tape covering the tape from the edges of the battery.

    번역하기

  5. Kurio Motion Speakers Replacement: 4 단계, 이미지 1/1

    • Use your soldering tool to solder the wires that are connected to the motherboard. There should be four wires.

    번역하기

  6. Kurio Motion Speakers Replacement: 5 단계, 이미지 1/1

    • Use your spudger to carefully pry out the speakers from underneath.

    번역하기
결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 1명과 함께

Yazeed Ayyad

회원 가입일: 09/10/23

447 평판

안내서 3개 작성하였습니다

배지: 3

팀

University of New Orleans, Team 3-7, McDonald Fall 2023 University of New Orleans, Team 3-7, McDonald Fall 2023 회원

UNO-MCDONALD-F23S3G7

3 회원들

안내서 4개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 1

7일 전: 1

30일 전: 1

전체 시간: 17