기기를 수리하세요 커뮤니티 상점

Kurio Touch 4S Screen Replacement

소개

This guide will show you how to replace your broken screen.

필요한 것

  1. Kurio Touch 4S Screen Replacement, Screen: 1 단계, 이미지 1/1

    • Make sure to open the back cover easily using the plastic opening tool

    편집

  2. Kurio Touch 4S Screen Replacement: 2 단계, 이미지 1/3 Kurio Touch 4S Screen Replacement: 2 단계, 이미지 2/3 Kurio Touch 4S Screen Replacement: 2 단계, 이미지 3/3

    • Remove back cover by prying away from the Kurio.

    • The easiest place to remove the cover is from the bottom and top; try to open it from right to left sides.

    편집

  3. Kurio Touch 4S Screen Replacement: 3 단계, 이미지 1/2 Kurio Touch 4S Screen Replacement: 3 단계, 이미지 2/2

    • To remove the battery, make sure the four 5mm Philips screws on each side of your device is open using the Philips#1 Screwdriver.

    편집

  4. Kurio Touch 4S Screen Replacement: 4 단계, 이미지 1/1

    • After you remove your four 5mm Phillips screws, use your plastic opening tool to help you open the plastic cover of your device.

    • All these screws are identical so don't worry if you get them out of order.

    편집

  5. Kurio Touch 4S Screen Replacement: 5 단계, 이미지 1/1

    • Remove the plastic cover that is covering the camera area.

    편집

  7. Kurio Touch 4S Screen Replacement: 6 단계, 이미지 1/1

    • Separate the two halves of your Kurio Touch 4S and lay them besides each other.

    편집

  8. Kurio Touch 4S Screen Replacement: 7 단계, 이미지 1/1

    • Use Phillips # 1 screw to open the 4 screws on the motherboard.

    • Open the screws gently and do not apply too much force as you could damage the motherboard.

    편집

  9. Kurio Touch 4S Screen Replacement: 8 단계, 이미지 1/1

    • Use the plastic opener to remove the battery.

    편집

  10. Kurio Touch 4S Screen Replacement: 9 단계, 이미지 1/1

    • Use tweezers to remove the black tape that is attached to the motherboard.

    편집

  11. Kurio Touch 4S Screen Replacement: 10 단계, 이미지 1/2 Kurio Touch 4S Screen Replacement: 10 단계, 이미지 2/2

    • Detach all the wire that are connected to the motherboard.

    • Also remove the camera module and other components that are attached to the motherboard.

    • For more information on soldering Click here

    편집

  12. Kurio Touch 4S Screen Replacement: 11 단계, 이미지 1/1

    • Remove the motherboard with the help of plastic opener.

    • Detach the power plug before you remove the motherboard.

    편집

  13. Kurio Touch 4S Screen Replacement: 12 단계, 이미지 1/1

    • Use the Plastic opener to remove the screen.

    • Do not apply too much pressure as the front cover could be damaged.

    편집

  14. Kurio Touch 4S Screen Replacement: 13 단계, 이미지 1/1

    • Use the soldering tool to remove the wire that is attached to the screen & the motherboard.

    편집

  15. Kurio Touch 4S Screen Replacement: 14 단계, 이미지 1/1

    • Use tweezers to remove the screen from your Kurio Toich 4S.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

다른 3명이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 3명과 함께

Ali

회원 가입일: 01/21/15

184 평판

안내서 1개 작성함

배지: 8

배지 +5개 더

팀

USF Tampa, Team 6-5, Brown Winter 2015 USF Tampa, Team 6-5, Brown Winter 2015 회원

USFT-BROWN-W15S6G5

3 회원들

안내서 10개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 1

전체 시간: 1,369