물건을 수리하세요 커뮤니티 상점

LeapFrog Scribble and Write Speaker Replacement

소개

This guide is for those who are looking to replace their Scribble and Write’s speaker due to muffled or distorted sounds. Familiarity with soldering is necessary in being able to replace the speaker. Please be sure to follow each and every step to avoid mishaps and causing further damage to the toy.

For more information on how to solder and desolder connections, please visit this guide.

필요한 것

  1. LeapFrog Scribble and Write Speaker Replacement, Speaker: 1 단계, 이미지 1개 중 1개

    • Turn your toy over so that the back is facing upward.

    편집

  2. LeapFrog Scribble and Write Speaker Replacement: 2 단계, 이미지 1개 중 1개

    • Using a Phillips #00 screwdriver, unscrew all circled areas.

    편집

  4. LeapFrog Scribble and Write Speaker Replacement: 3 단계, 이미지 1개 중 1개

    • Very carefully, remove the back case to reveal the contents of the toy.

    편집

  5. LeapFrog Scribble and Write Speaker Replacement: 4 단계, 이미지 1개 중 1개

    • Using a Phillips #00 screwdriver, remove the screw highlighted in the image.

    편집

  6. LeapFrog Scribble and Write Speaker Replacement: 5 단계, 이미지 1개 중 1개

    • Un-solder the wiring from the speaker and motherboard.

    • Caution: Be careful when using a soldering iron. Improper usage may result in burns.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

작성자

7다른 기여자 명과 함께

Anthony Kidd

회원 가입일: 02/10/16

256 평판

안내서 2개를 작성함

배지: 14

배지 +11개 더

팀

USF Tampa, Team 1-5, Nance Spring 2016 USF Tampa, Team 1-5, Nance Spring 2016 회원

USFT-NANCE-S16S1G5

3 회원들

안내서 10개를 작성함

0가이드 댓글

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 1

지난 30일: 14

전체 시간: 987