기기를 수리하세요 커뮤니티 상점

Linksys WAP54g Bottom Casing/Motherboard Replacement

소개

After the top casing is removed we can remove the bottom casing to isolate the motherboard.

필요한 것

  1. Linksys WAP54g Bottom Casing/Motherboard Replacement, Top Casing: 1 단계, 이미지 1/1

    • Power down and unplug the device.

    번역하기

  2. Linksys WAP54g Bottom Casing/Motherboard Replacement: 2 단계, 이미지 1/1
    번역하기

  3. Linksys WAP54g Bottom Casing/Motherboard Replacement: 3 단계, 이미지 1/1

    • Remove the two black rubber feet of the device using the screwdriver. The feet are located on the bottom towards the front.

    번역하기

  5. Linksys WAP54g Bottom Casing/Motherboard Replacement: 4 단계, 이미지 1/1

    • Once the feet are removed, two small screws will be visible. With a small screwdriver, unscrew them. Screws are phillips head, 4.35 mm in diameter, 7.88 mm in length.

    번역하기

  6. Linksys WAP54g Bottom Casing/Motherboard Replacement: 5 단계, 이미지 1/1

    • To remove the front blue panel, grip firmly and place thumbs in the two notches on top. Push thumbs forward while keeping a firm grip on bottom.

    • This may require a bit of force.

    번역하기

  7. Linksys WAP54g Bottom Casing/Motherboard Replacement: 6 단계, 이미지 1/1

    • Now slide the bottom panel forward and remove it so the top casing is isolated from the bottom casing and motherboard.

    번역하기

  8. Linksys WAP54g Bottom Casing/Motherboard Replacement: 7 단계, 이미지 1/2 Linksys WAP54g Bottom Casing/Motherboard Replacement: 7 단계, 이미지 2/2

    • Unscrew the nut on the outer side of the back casing. Remove the nut and the washer from both antenna mounts.

    번역하기

  9. Linksys WAP54g Bottom Casing/Motherboard Replacement: 8 단계, 이미지 1/2 Linksys WAP54g Bottom Casing/Motherboard Replacement: 8 단계, 이미지 2/2

    • From here, remove the wires and nuts connected to the back panel by pulling the nuts through the holes.

    • Now the top casing has been removed and isolated from the rest of the device. From here, you can make repairs to the top casing.

    • Once the top panel is removed the main board will still be attached to the bottom panel.

    번역하기

  10. Linksys WAP54g Bottom Casing/Motherboard Replacement, Bottom Casing/Motherboard: 9 단계, 이미지 1/2 Linksys WAP54g Bottom Casing/Motherboard Replacement, Bottom Casing/Motherboard: 9 단계, 이미지 2/2

    • Unscrew the two screws that connect the motherboard to the bottom casing.

    • The motherboard and bottom casing should be completely separated at this point. This allows for replacement of the motherboard and/ or its components as well as the bottom casing.

    번역하기
결론

After the motherboard is isolated component level repairs can be made.

다른 2명이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 6명과 함께

Mathew Fuller

회원 가입일: 10/04/11

146 평판

안내서 1개 작성함

배지: 11

배지 +8개 더

팀

Cal Poly, Team 21-21, Maness Fall 2011 Cal Poly, Team 21-21, Maness Fall 2011 회원

CPSU-MANESS-F11S21G21

5 회원들

안내서 12개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 2,582