소개

If, after reading through this guide, you are still in need of assistance, please refer back to the device page or the troubleshooting page.

부품

부품은 필요하지 않습니다.

Unfold the antennas straight away from the device.
  • Unfold the antennas straight away from the device.

댓글 쓰기

Remove the black caps from the antennas by pulling them away from the device.
  • Remove the black caps from the antennas by pulling them away from the device.

댓글 쓰기

  • Unscrew each of the antennas from the wireless device.

댓글 쓰기

  • Using a bit of force, remove the blue plastic case.

댓글 쓰기

  • To remove the black casing that surrounds the green motherboard, slide the top half of the casing backwards. It only moves a very short distance.

  • Pull the top piece upwards and away from the bottom to remove.

댓글 쓰기

  • Locate the 2 M2.5x6mm screws that attach the motherboard to the back case.

  • Remove the two screws from the motherboard as indicated with the Phillips head screwdriver.

댓글 쓰기

  • Once screws have been removed, slide the motherboard in the direction of its LED lights.

  • Lift motherboard up and away from the black lower casing.

댓글 쓰기

결론

To reassemble your device, follow these instructions in reverse order.

다른 3명이 해당 안내서를 완성하였습니다.

Aaron Brown

회원 가입일: 2011년 10월 11일

163 평판

안내서 2개 작성하였습니다

Cal Poly, Team 17-7, Regan Fall 2011 Cal Poly, Team 17-7, Regan Fall 2011 회원

CPSU-REGAN-F11S17G7

4 회원들

안내서 5개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 2

지난 30일: 9

전체 시간: 2,941