기기를 수리하세요 커뮤니티 상점

Logitech MBJ58 Mouse Button Replacement

필요한 것

  1. Logitech MBJ58 Mouse Button Replacement, Mouse button: 1 단계, 이미지 1/1

    • Unfortunately, the left mouse button was 2x "sucked out" (button & the plastic pin over it)

    • Solution: Swap the button on the left with the mouse wheel button and - n small piece of office clip - for reinforcement - melt into the bottom of the pen.

    • YahooOoO - Looift widerer! Addendum: "mouse wheel click" Works by the way also - because there small springs ensure that the button does not "stick" in the pressed state

    번역하기

    • Loosen the Phillips screw in the bottom.

    번역하기

    • The plastic holder of the mouse buttons is loosened by carefully pressing the two plastic closures in the middle.

    • The motherboard is just plugged in and can be carefully removed forwards and upwards.

    번역하기

    • Sensibly, first clean everything (dry).

    • Now click the button for "Links" with the button below the mouse wheel. The solder joints are huge and easy to get even for beginners.

    번역하기

    • Everything should click together again and screws can be screwed back in. -> Loooift.

    번역하기
결론

Repeat the steps in reverse order to reassemble your device.

다른 한 분이 해당 안내서를 완성하였습니다.

다음 번역가들에게 특별히 감사 드립니다:

de en

100%

Corey Meyer

Annika Faelker

tayola

이 번역자 분들은 저희가 세상을 수리하는데 동참해 주시는 분입니다! 기여하시겠습니까?
번역 시작하기 ›

작성자

다른 기여자 1명과 함께

Tho. Hummet

회원 가입일: 04/05/18

121 평판

안내서 1개 작성함

배지: 2

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 8

전체 시간: 299