기기를 수리하세요 커뮤니티 상점

Lorex LW2744 Wi-Fi Antenna Replacement

소개

This guide explains how to re-attach the WiFi antenna.

필요한 것

  1. Lorex LW2744 Wi-Fi Antenna Replacement, Battery: 1 단계, 이미지 1/1

    • Remove the 5.0mm screw using the Phillips #0 head screwdriver.

    번역하기

  2. Lorex LW2744 Wi-Fi Antenna Replacement: 2 단계, 이미지 1/1

    • Insert metal spudger as shown in the picture. Move spudger along to the other side until both snaps come loose.

    번역하기

  3. Lorex LW2744 Wi-Fi Antenna Replacement: 3 단계, 이미지 1/1

    • Picture shows the removed battery cover.

    번역하기

  5. Lorex LW2744 Wi-Fi Antenna Replacement: 4 단계, 이미지 1/1

    • Slide the battery out by pulling on one of two plastics tabs.

    번역하기

  6. Lorex LW2744 Wi-Fi Antenna Replacement, Wi-Fi Antenna: 5 단계, 이미지 1/1

    • Remove the remaining five 6.0 mm Phillips #0 screws.

    번역하기

  7. Lorex LW2744 Wi-Fi Antenna Replacement: 6 단계, 이미지 1/1

    • Use the spudger to remove the back cover. Insert the spudger between the back and front cover. Once inserted, you will need to move it around the perimeter to release the snaps holding it together.

    번역하기

  8. Lorex LW2744 Wi-Fi Antenna Replacement: 7 단계, 이미지 1/1

    • Once back cover is removed, the speaker wire will need to be removed. Use tweezers to remove wire.

    번역하기

  9. Lorex LW2744 Wi-Fi Antenna Replacement: 8 단계, 이미지 1/1

    • Begin by heating the exposed end of the grey lead with the tip of a soldering iron while simultaneously pulling the lead away from the connection, using tweezers to grasp the lead by the insulation.

    • For more information on soldering, check out this repair guide: iFixit Soldering

    번역하기
결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 4명과 함께

Yancey Crase

회원 가입일: 03/26/18

217 평판

안내서 2개 작성하였습니다

배지: 3

팀

IUPUI, Team S1-G4, Harley Spring 2018 IUPUI, Team S1-G4, Harley Spring 2018 회원

IUPUI-HARLEY-S18S1G4

7 회원들

안내서 5개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 7

30일 전: 10

전체 시간: 261