소개
Replace your interconnect board to fix a broken hard drive/optical drive connector.
필요한 것
-
-
Power down your Mac mini, disconnect all of the cables, and flip it over.
-
Insert the Jimmy into the crack between the aluminum top housing and the plastic lower housing.
-
The Jimmy should reach a stop about 3/8" down.
-
-
-
-
We will first remove the AirPort antenna, located in the lower left corner of this picture.
-
-
-
Use the flat end of a spudger to pry the audio ribbon cable connector up off the interconnect board.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
다른 5명이 해당 안내서를 완성하였습니다.