Skip to main content

소개

Remove the lower case to access most of your MacBook Pro's internals.

  1. Remove the following ten screws securing the lower case to the upper case:
    • Remove the following ten screws securing the lower case to the upper case:

    • Three 13.5 mm (14.1 mm) Phillips screws.

    • Seven 3 mm Phillips screws.

    • When removing these screws, note how they come out at a slight angle. They must be reinstalled the same way.

  2. 아이폰 배터리 수리 키트

    Only $29.99

    Buy Now

    아이폰 배터리 수리 키트

    Only $29.99

    Buy Now
  3. Using both hands, lift the lower case near the vent to pop it off two clips securing it to the upper case.
    • Using both hands, lift the lower case near the vent to pop it off two clips securing it to the upper case.

    • Remove the lower case and set it aside.

결론

To reassemble your device, follow these instructions in reverse order.

다른 44명이 해당 안내서를 완성하였습니다.

Walter Galan

595,190 평판

안내서 1,203개 작성하였습니다

When replacing the lower case, be sure to re-seat the clips that popped when removing it. There are two, located near the edge of the battery and the motherboard. Apply firm pressure over these spots until the clips click again, before replacing the screws.

keithbartholomew - 답글

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 11

지난 30일: 84

전체 시간: 37,506