소개

This guide will show you how to remove the Access Door from your laptop.

  1. With the case closed, place the Unibody top-side down on a flat surface.
    • With the case closed, place the Unibody top-side down on a flat surface.

    • Depress the grooved side of the access door release latch enough to grab the free end. Lift the release latch until it is vertical.

  2. US$100 이상 또는 Pro Tech Toolkit을 포함한 모든 주문의 배송은 무료입니다!

    상점 둘러보기
  3. The access door should now be raised enough to lift it up and out of the Unibody.
    • The access door should now be raised enough to lift it up and out of the Unibody.

결론

To reassemble your device, follow these instructions in reverse order.

다른 53명이 해당 안내서를 완성하였습니다.

Walter Galan

589,049 평판

안내서 1,203개 작성하였습니다

Are there more than one A1278? Mine is the MacBook Pro 13” from 2010, which has no access door, but just a single body shell (613-8316-A)

Martin - 답글

Yes there are multiple machines with the model identifier A1278. In fact all non retina 13“ MacBook Pro models share the same A1278 model identifier as well as the Late 2008 Aluminum MacBook. However only the Late 2008 MacBook has the split access door.

Carl Hauschke -

댓글 쓰기

조회 통계:

지난 24시간: 3

지난 7일: 24

지난 30일: 95

전체 시간: 37,715