메인 콘텐츠로 스킵하기

부품

지정된 부품이 없습니다.

  1. First be sure to turn the power switch to the off position.
    • First be sure to turn the power switch to the off position.

    • Do this by turning the leftmost knob counter-clockwise as until the line points to "off."

  2. Now remove the battery. On the back of the device locate the battery cover. Remove it by pushing down on the clip.
    • Now remove the battery.

    • On the back of the device locate the battery cover.

    • Remove it by pushing down on the clip.

    • Then pull the piece of fabric until the battery comes out.

  3. Use the long, skinny phillips head screwdriver to remove the 4 7/16" screws on the back of the device in the four corners. Once unscrewed, do not try to take each screw out. Move to next step once all screwed have been unscrewed.
    • Use the long, skinny phillips head screwdriver to remove the 4 7/16" screws on the back of the device in the four corners.

    • Once unscrewed, do not try to take each screw out. Move to next step once all screwed have been unscrewed.

  4. 맥북 배터리 수리 키트

    기본 가격은 $69.99

    Buy Now

    맥북 배터리 수리 키트

    기본 가격은 $69.99

    Buy Now
  5. Now pull the back panel off and place it down as shown. Pull the panel straight up so you do not lose the screws.
    • Now pull the back panel off and place it down as shown. Pull the panel straight up so you do not lose the screws.

  6. Use a soldering iron to disconnect the two wires from the speaker.
  7. Remove the two 7/16" screws located in the bottom left and top right corners with a phillips head screw driver. After removing the screws, the metal clips will need to be removed as well. Remove the two 7/16" screws located in the bottom left and top right corners with a phillips head screw driver. After removing the screws, the metal clips will need to be removed as well.
    • Remove the two 7/16" screws located in the bottom left and top right corners with a phillips head screw driver. After removing the screws, the metal clips will need to be removed as well.

  8. You may now remove the speaker by pulling it straight out.
    • You may now remove the speaker by pulling it straight out.

결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

MacKinley

회원 가입일: 2013년 10월 22일

675 평판

안내서 5개 작성하였습니다

University of Maryland, Team 1-1, Shastany Fall 2013 University of Maryland, Team 1-1, Shastany Fall 2013 회원

UMD-SHASTANY-F13S1G1

3 회원들

안내서 5개 작성하였습니다

So where do we find a replacement speaker? If no parts are required what is the point in taking the speaker out?

Patrick Gillett - 답글

This speaker unavailable in Marlins. Any online sources. How should an untutored amateur repairer describe the replacement in order to get the right thing

Patrick Gillett - 답글

Any speaker that will fit should work. Might want to check to make sure the Watts they consume are the same. I imagine that if you put a speaker in that consumes more Watts you could potentially over heat the power supply or other components.

MacKinley - 답글

댓글 쓰기

조회 통계:

지난 24시간: 2

지난 7일: 7

지난 30일: 32

전체 시간: 2,662