기기를 수리하세요 커뮤니티 상점

MerchSource the Black Series Boat Racer Battery Cable Replacement

소개

This repair guide will show you how to replace the cable that connects the positive battery terminal to the circuit board within the remote controller for the MerchSource the Black Boat Series Boat Racers Device.

필요한 것

  1. MerchSource the Black Series Boat Racer Battery Cable Replacement, Battery Cable: 1 단계, 이미지 1/2 MerchSource the Black Series Boat Racer Battery Cable Replacement, Battery Cable: 1 단계, 이미지 2/2

    • Turn the remote controller over to the back.

    편집

  2. MerchSource the Black Series Boat Racer Battery Cable Replacement: 2 단계, 이미지 1/1

    • Slide the battery cover off.

    편집

  4. MerchSource the Black Series Boat Racer Battery Cable Replacement: 3 단계, 이미지 1/2 MerchSource the Black Series Boat Racer Battery Cable Replacement: 3 단계, 이미지 2/2

    • Remove both AA-batteries.

    편집

  5. MerchSource the Black Series Boat Racer Battery Cable Replacement: 4 단계, 이미지 1/1

    • Use a Phillips #1 screwdriver, remove the four screws located in the four corners of the back of the remote controller.

    • Screw length is 6 mm.

    편집

  6. MerchSource the Black Series Boat Racer Battery Cable Replacement: 5 단계, 이미지 1/3 MerchSource the Black Series Boat Racer Battery Cable Replacement: 5 단계, 이미지 2/3 MerchSource the Black Series Boat Racer Battery Cable Replacement: 5 단계, 이미지 3/3

    • Separate the two halves of the remote controller.

    편집

  7. MerchSource the Black Series Boat Racer Battery Cable Replacement: 6 단계, 이미지 1/1

    • Solder the wire to reconnect it.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 4명과 함께

Monica Reece

회원 가입일: 08/31/18

672 평판

안내서 5개 작성하였습니다

배지: 7

배지 +4개 더

팀

Western Carolina University, Team S1-G3, Virtue Fall 2018 Western Carolina University, Team S1-G3, Virtue Fall 2018 회원

WCU-VIRTUE-F18S1G3

4 회원들

안내서 10개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 4

30일 전: 5

전체 시간: 200