주요 콘텐츠로 건너뛰기

소개

This guide shows how to remove and replace the entire recoil starter assembly. The assembly is an OEM part for Honda GX200 engine models.

If you replace the recoil starter with a non-OEM part, you may have to remove the starter cap. For that, you will need the following additional tools:

  • 3/4” deep socket

도구

부품

지정된 부품이 없습니다.

  1. Before you begin, be sure that the engine is powered off and is cool to the touch.
    • Before you begin, be sure that the engine is powered off and is cool to the touch.

    • Use a 10 mm socket to remove the three 24 mm long bolts.

  2. Remove the recoil starter assembly.
    • Remove the recoil starter assembly.

  3. If you are replacing the assembly with a non-OEM part, you may also have to replace the starter cap. Remove the 3/4" bolt with a deep socket.
    • If you are replacing the assembly with a non-OEM part, you may also have to replace the starter cap.

    • Remove the 3/4" bolt with a deep socket.

    • This bolt can be very difficult to remove. Use the hook as a bracing point to keep the starter cap from rotating.

결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

Arthur Shi

회원 가입일: 2018년 01월 03일

173,051 평판

안내서 428개 작성하였습니다

iFixit iFixit 회원

Community

138 회원들

안내서 16,984개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 8

전체 시간: 206