소개

Before proceeding with the replacement guide, please ensure the headphones are unplugged from any device.

부품

  1. Remove leather headphone cushion by pulling edge towards middle of headphone.
    • Remove leather headphone cushion by pulling edge towards middle of headphone.

    • It should slip off the device.

  2. Carefully peel back foam pad to prevent tearing.
    • Carefully peel back foam pad to prevent tearing.

    • It is glued at both the top and bottom.

  3. US$100.00 이상 또는 Pro Tech Toolkit을 포함한 모든 주문의 배송은 무료입니다!

    상점 둘러보기
  4. Use the T6 torx screwdriver to remove the three screws holding the speaker in place.
    • Use the T6 torx screwdriver to remove the three screws holding the speaker in place.

    • To avoid stripping screws, be sure to use the right screw bit oriented perpendicular to the face of the screw.

  5. With the speaker removed from the speaker module, clip the black and white wires on the back of the speaker, as shown.
    • With the speaker removed from the speaker module, clip the black and white wires on the back of the speaker, as shown.

    • Solder wires onto corresponding pads of replacement speaker.

    • For soldering see the ifixit soldering guide: How To Solder and Desolder Connections

결론

To reassemble your device, follow these instructions in reverse order.

John Ware

회원 가입일: 2014년 02월 24일

325 평판

안내서 2개 작성하였습니다

Michigan Tech, Team 5-1, Lauer Spring 2014 Michigan Tech, Team 5-1, Lauer Spring 2014 회원

MTU-LAUER-S14S5G1

2 회원들

안내서 3개 작성하였습니다

조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 1

전체 시간: 222