소개

Use this guide to replace the LCD.

부품

부품은 필요하지 않습니다.

  1. Clearly visible damage to the LCD. It did not even light up.
    • Clearly visible damage to the LCD. It did not even light up.

    • Remove the screw from the right side.

    • Remove the visible screw from the left side.

    댓글 쓰기

  2. Open the USB A/C cover, there is one more screw that needs to be removed. That is why it is important to always remove all covers...
    • Open the USB A/C cover, there is one more screw that needs to be removed. That is why it is important to always remove all covers...

    • Remove the three screws from the bottom.

    • Start splitting the case from the battery compartment. I used an opening tool, but fingernails will be sufficient as well.

    댓글 쓰기

    • After the splitting of the case, the LCD is imediately visible.

    • Lift the LCD out of the frame by using your fingernail or an opening tool. Do not remove it yet, it is still connected.

    • Flip the black clasp up by using fingernails or the opening tool. No big force is required. Remove the old LCD.

    댓글 쓰기

    • Here is the new screen, note the blue tab. This is the screen protector, remove it after installation.

    • Reassemble in reverse order. Hopefully your results will be the same as for me.

    댓글 쓰기

결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

oldturkey03

회원 가입일: 2010년 09월 29일

548,429 평판

안내서 101개 작성하였습니다

OTS OTS 회원

Business

1 회원

안내서 122개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 5

전체 시간: 2,292