소개
If you notice the LED lights on your device are continuously blinking or not working at all, this step-by-step guide will show you how to replace them individually, or all together. For soldering help, follow the How to Solder and Desolder Connections guide.
필요한 것
-
-
On the circuit board, locate the LED light you wish to replace.
-
On the bottom of the board, each LED is designated with a small triangle with a line at one tip and a label of LED1, LED2, etc.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
팀
Arkansas State University, Team S1-G4, Chamberlain Fall 2017 Arkansas State University, Team S1-G4, Chamberlain Fall 2017 회원
ARSU-CHAMBERLAIN-F17S1G4
2 회원들
안내서 8개 작성하였습니다
