주요 콘텐츠로 건너뛰기

소개

Step by step guide to replacing your damaged LCD Display

도구

지정된 도구가 없습니다.

부품

  1. Remove the battery and memory card from the unit Remove 6 (0.3mm) screws from the sides of the unit Remove 5 (0.3mm) screws from the bottom of the unit
    • Remove the battery and memory card from the unit

    • Remove 6 (0.3mm) screws from the sides of the unit

    • Remove 5 (0.3mm) screws from the bottom of the unit

  2. Lift up slightly the rear cover. Do not remove rear cover yet. It is still attached to the Main PCB.
    • Lift up slightly the rear cover.

    • Do not remove rear cover yet. It is still attached to the Main PCB.

    • Flip up the cable clamps using a spudger or other device. Careful not to break the clamps. Release flex cables and remove back cover.

  3. Release the 3 metal clips from the rear cover and remove the LCD Release the 3 metal clips from the rear cover and remove the LCD Release the 3 metal clips from the rear cover and remove the LCD
    • Release the 3 metal clips from the rear cover and remove the LCD

결론

To reassemble your device, follow these instructions in reverse order.

Sales Cameraparts4you

회원 가입일: 2016년 07월 01일

2,907 평판

안내서 20개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 2

전체 시간: 230