기기를 수리하세요 커뮤니티 상점

PowerLead Puto PLD003 Lens Replacement

소개

This guide shows how to remove the side panel from the camera, how to remove the back panel, and how to replace the lens.

필요한 것

  1. PowerLead Puto PLD003 Lens Replacement, Side Panel: 1 단계, 이미지 1/1

    • Slide the battery eject button open to release the battery door.

    번역하기

  2. PowerLead Puto PLD003 Lens Replacement: 2 단계, 이미지 1/1

    • With the battery door open, carefully remove all four 5 mm Phillips #1 screws.

    번역하기

  3. PowerLead Puto PLD003 Lens Replacement: 3 단계, 이미지 1/1

    • Rotate the camera so that the underside is facing up.

    • Remove the four 5 mm Phillips #1 screws.

    번역하기

  4. PowerLead Puto PLD003 Lens Replacement: 4 단계, 이미지 1/1

    • Place the camera on a flat surface, with its underside facing you.

    • Gently pull up on the side panel to remove it from the camera.

    번역하기

  5. PowerLead Puto PLD003 Lens Replacement, Lens: 5 단계, 이미지 1/2 PowerLead Puto PLD003 Lens Replacement, Lens: 5 단계, 이미지 2/2

    • Remove the three 4 mm Phillips #1 screws holding the weight.

    • Remove the weight.

    번역하기

  7. PowerLead Puto PLD003 Lens Replacement: 6 단계, 이미지 1/1

    • Remove the two 4 mm Phillips #1 screws holding the back panel in place.

    번역하기

  8. PowerLead Puto PLD003 Lens Replacement: 7 단계, 이미지 1/1

    • Apply pressure to the back panel (away from the camera) to remove.

    번역하기

  9. PowerLead Puto PLD003 Lens Replacement: 8 단계, 이미지 1/1

    • Set aside back panel for now.

    • Remove the final 4 mm Phillips #1 screw holding the screen in place. It is very small and hard to see.

    번역하기

  10. PowerLead Puto PLD003 Lens Replacement: 9 단계, 이미지 1/1

    • Carefully apply pressure, away from the camera, to the screen to detach it from the body.

    • The white cord should still be connected to the body.

    • OPTIONAL: Remove the screen to make accessing the lens easier

    번역하기

  11. PowerLead Puto PLD003 Lens Replacement: 10 단계, 이미지 1/1

    • Unscrew the two 4 mm Phillips #1 screws holding onto the lens casing

    • There are also two 4 mm Phillips #1 screws on the other side holding onto the lens casing, remove them as well.

    번역하기

  12. PowerLead Puto PLD003 Lens Replacement: 11 단계, 이미지 1/1

    • Pull forward on the lens casing to remove it. The cord connecting the light to the motherboard should still be attached.

    번역하기

  13. PowerLead Puto PLD003 Lens Replacement: 12 단계, 이미지 1/1

    • Unscrew the three 4 mm Phillips #1 screws holding the plastic lens holder.

    번역하기

  14. PowerLead Puto PLD003 Lens Replacement: 13 단계, 이미지 1/1

    • Remove the plastic lens holder.

    번역하기

  15. PowerLead Puto PLD003 Lens Replacement: 14 단계, 이미지 1/1

    • Push the lens out of the plastic casing from the back.

    • Insert new lens into the plastic casing.

    번역하기
결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 2명과 함께

Justin Tew

회원 가입일: 03/31/16

767 평판

안내서 7개 작성하였습니다

배지: 13

배지 +10개 더

팀

Eastern Washington University, Team 1-2, Giguere Spring 2016 Eastern Washington University, Team 1-2, Giguere Spring 2016 회원

EWU-GIGUERE-S16S1G2

4 회원들

안내서 7개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 1

7일 전: 5

30일 전: 6

전체 시간: 169