주요 콘텐츠로 건너뛰기

Ridgid GEN5X R8642 Battery Port Replacement

필요한 것

  1. Ridgid GEN5X R8642 Battery Port Replacement, Battery Port: 1 단계, 이미지 1/1
    • Remove the plastic tab holding the handle cover in place by prying upward with the spudger until the tab pops off.

  2. Ridgid GEN5X R8642 Battery Port Replacement: 2 단계, 이미지 1/1
    • Remove the handle cover by pulling it towards the front of the saw.

    • The grip can sometimes become stuck and may require a decent amount of force to remove.

  3. Ridgid GEN5X R8642 Battery Port Replacement: 3 단계, 이미지 1/3 Ridgid GEN5X R8642 Battery Port Replacement: 3 단계, 이미지 2/3 Ridgid GEN5X R8642 Battery Port Replacement: 3 단계, 이미지 3/3
    • Use a T20 Torx screwdriver to remove the nine M4 X 16mm screws from the plastic housing.

  4. Ridgid GEN5X R8642 Battery Port Replacement: 4 단계, 이미지 1/1
    • Use a JIS #1 screwdriver to remove the two M4 x 25mm screws on both sides of the metal housing.

  5. Ridgid GEN5X R8642 Battery Port Replacement: 5 단계, 이미지 1/1
    • Remove one half of the plastic housing using a spudger so that the internal system is exposed.

  6. Ridgid GEN5X R8642 Battery Port Replacement: 6 단계, 이미지 1/1
    • Remove the plastic wire covers to the red and black connections on the switch assembly.

    • When you remove the wire covers, you should be able to see the solder on the wires.

    • Desolder the connections on both the red and black wire using a soldering iron.

    • Once the solder is removed, pull out the wires with the battery port attached to the wires.

결론

To reassemble your device, follow these instructions in reverse order.

Grant White

회원 가입일: 02/12/19

453 평판

안내서 2개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 2

7일 전: 7

30일 전: 12

전체 시간: 381