기기를 수리하세요 커뮤니티 상점

Ryobi CSB125 Blade Replacement

소개

This guide will show you how to properly install a new blade to your Ryobi CSB125 circular saw. When performing cuts, if there is a burning smell then most likely the blade is either dirty or dull. In this case, the blade should be replaced with a new one. This troubleshooting page will help diagnose any potential problems occurring due to a faulty blade. In the event that a new blade is needed, this guide will show the steps to properly install a new one. The only tool you will need is a 7”/32 allen key.

필요한 것

  1. Ryobi CSB125 Blade Replacement, Blade: 1 단계, 이미지 1/1

    • Place the saw down on a flat surface with the blade facing up.

    • Make sure that the saw is unplugged from any power source.

    편집

  2. Ryobi CSB125 Blade Replacement: 2 단계, 이미지 1/2 Ryobi CSB125 Blade Replacement: 2 단계, 이미지 2/2

    • Use the 7”/32 allen key to loosen the 5/16-18 x 9/16 in. blade screw.

    편집

  4. Ryobi CSB125 Blade Replacement: 3 단계, 이미지 1/1

    • Remove the 5/16-18 x 9/16 in. blade screw, spring washer, and the outer blade washer.

    편집

  5. Ryobi CSB125 Blade Replacement: 4 단계, 이미지 1/1

    • Remove the blade from the saw.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

다른 2명이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 1명과 함께

Curtis Melo

회원 가입일: 10/31/19

1,066 평판

안내서 5개 작성하였습니다

배지: 10

배지 +7개 더

팀

UMass Dartmouth, Team S2-G1, Barthe Fall 2019 UMass Dartmouth, Team S2-G1, Barthe Fall 2019 회원

UMASSD-BARTHE-F19S2G1

3 회원들

안내서 5개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 3

30일 전: 19

전체 시간: 1,650