기기를 수리하세요 커뮤니티 상점

Samsung Galaxy Tab S2 9.7 AT&T SIM Card Holder Replacement

소개

A broken SIM card holder or memory card holder prevents your tablet from connecting to your network or storing memory, respectively. Before starting, eject the SIM card and memory card trays.

필요한 것

  1. Samsung Galaxy Tab S2 9.7 AT&T SIM Card Holder Replacement, Screen: 1 단계, 이미지 1/2 Samsung Galaxy Tab S2 9.7 AT&T SIM Card Holder Replacement, Screen: 1 단계, 이미지 2/2

    • Apply the heat gun around the edges of the tablet to melt the adhesive glue.

    • Do not allow the gun to remain still for more than two seconds, so that you do not melt the plastic around the screen.

    • If you do not have access to a heat gun, you may also use an iOpener or a hair dryer. Refer to the iOpener guide for extra help.

    번역하기

  2. Samsung Galaxy Tab S2 9.7 AT&T SIM Card Holder Replacement: 2 단계, 이미지 1/2 Samsung Galaxy Tab S2 9.7 AT&T SIM Card Holder Replacement: 2 단계, 이미지 2/2

    • Apply the suction to the bottom or top right corner.

    • Use the plastic opening tool at several points around the screen while the suction is being applied to pop the screen out.

    번역하기

  3. Samsung Galaxy Tab S2 9.7 AT&T SIM Card Holder Replacement: 3 단계, 이미지 1/1

    • Once the screen is detached, open the tablet like a book.

    • Gently open the tablet, and do not pull the pieces apart since you can risk damaging the orange ribbon cable.

    번역하기

  5. Samsung Galaxy Tab S2 9.7 AT&T SIM Card Holder Replacement: 4 단계, 이미지 1/1

    • Using the precision tweezers, remove the silver tape that is holding the orange ribbon cable connecting the two pieces.

    번역하기

  6. Samsung Galaxy Tab S2 9.7 AT&T SIM Card Holder Replacement: 5 단계, 이미지 1/1

    • Using the precision tweezers, remove the small press-fit connector from the body of the tablet.

    번역하기

  7. Samsung Galaxy Tab S2 9.7 AT&T SIM Card Holder Replacement, Screws: 6 단계, 이미지 1/2 Samsung Galaxy Tab S2 9.7 AT&T SIM Card Holder Replacement, Screws: 6 단계, 이미지 2/2

    • Using the Philips #000 screwdriver, remove the seventeen 2.74 mm screws around the edges.

    • Remove the two 2.74 mm black screws in the middle of the tablet with the Philips #000 screwdriver.

    • Put the screws on a magnetic project mat or in a container so that you do not lose them.

    번역하기

  8. Samsung Galaxy Tab S2 9.7 AT&T SIM Card Holder Replacement: 7 단계, 이미지 1/3 Samsung Galaxy Tab S2 9.7 AT&T SIM Card Holder Replacement: 7 단계, 이미지 2/3 Samsung Galaxy Tab S2 9.7 AT&T SIM Card Holder Replacement: 7 단계, 이미지 3/3

    • Take the plastic opening tool around the tablet to remove the motherboard from the device.

    번역하기

  9. Samsung Galaxy Tab S2 9.7 AT&T SIM Card Holder Replacement, SIM Card Holder: 8 단계, 이미지 1/2 Samsung Galaxy Tab S2 9.7 AT&T SIM Card Holder Replacement, SIM Card Holder: 8 단계, 이미지 2/2

    • Locate the SIM card and the memory card holders along the right side of the tablet.

    • Using the precision tweezers, remove the SIM card and memory card holders.

    번역하기
결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 4명과 함께

Joy Harris

회원 가입일: 02/15/17

814 평판

안내서 7개 작성하였습니다

배지: 15

배지 +12개 더

팀

USF Tampa, Team S3-G4, Sullivan Spring 2017 USF Tampa, Team S3-G4, Sullivan Spring 2017 회원

USFT-SULLIVAN-S17S3G4

3 회원들

안내서 14개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 1

7일 전: 2

30일 전: 5

전체 시간: 689