기기를 수리하세요 커뮤니티 상점

Samsung SmartThings Hub USB Port Replacement

소개

This guide outlines a procedure for completely removing and replacing a non-functioning USB port on the motherboard of the Samsung SmartThings Hub.

필요한 것

  1. Samsung SmartThings Hub USB Port Replacement, USB Port: 1 단계, 이미지 1/1

    • To open your device, gently slide the grey bottom cover in the direction of the arrow as shown.

    편집

  2. Samsung SmartThings Hub USB Port Replacement: 2 단계, 이미지 1/3 Samsung SmartThings Hub USB Port Replacement: 2 단계, 이미지 2/3 Samsung SmartThings Hub USB Port Replacement: 2 단계, 이미지 3/3

    • Make sure the batteries are removed before attempting disassembly.

    • Using your Phillips #1 screwdriver, remove the four visible 12.5mm screws.

    • Next, either peel up the longer of the two stickers or punch a hole with the tip of your screwdriver to access the fifth 12.5mm screw.

    편집

  4. Samsung SmartThings Hub USB Port Replacement: 3 단계, 이미지 1/3 Samsung SmartThings Hub USB Port Replacement: 3 단계, 이미지 2/3 Samsung SmartThings Hub USB Port Replacement: 3 단계, 이미지 3/3

    • Once all five screws are removed, split the casing apart by applying gentle upwards pressure against the positive terminals in the battery compartment.

    편집

  5. Samsung SmartThings Hub USB Port Replacement: 4 단계, 이미지 1/2 Samsung SmartThings Hub USB Port Replacement: 4 단계, 이미지 2/2

    • To remove the motherboard, grip the USB port and the Ethernet port. Lift up, then slide towards the front of the device to release the motherboard from the black retaining clip shown on the right.

    편집

  6. Samsung SmartThings Hub USB Port Replacement: 5 단계, 이미지 1/3 Samsung SmartThings Hub USB Port Replacement: 5 단계, 이미지 2/3 Samsung SmartThings Hub USB Port Replacement: 5 단계, 이미지 3/3

    • Place the motherboard on a clean, flat surface.

    • Preheat your soldering iron. Each USB port has eight points of connection to the motherboard (pictured above). Using your soldering iron, apply heat to each solder joint in turn while pulling the USB port away from the board.

    • Soldering irons can reach temperatures of over 500 degrees. Watch your fingers!

    • For more information on soldering refer to How To Solder and Desolder Connections.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

다른 2명이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 4명과 함께

Erin

회원 가입일: 09/28/17

485 평판

안내서 4개 작성하였습니다

배지: 7

배지 +4개 더

팀

Eastern Washington University, Team S2-G4, Crane Fall 2017 Eastern Washington University, Team S2-G4, Crane Fall 2017 회원

EWU-CRANE-F17S2G4

4 회원들

안내서 5개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 8

30일 전: 11

전체 시간: 720