물건을 수리하세요 커뮤니티 상점

Sapphire Nitro+ RX 6800 XT SE Fan Replacement

소개

Follow this guide to replace your broken fans in your Sapphire Nitro+ RX 6800 XT SE graphics card.

This graphics card uses 3mm JIS000 screws but you can use a Phillips screw driver as an alternative.

Note: This guide also works for the entire Sapphire Nitro+ RX 6000 series with a couple exceptions:

  • The RX 6650 XT, RX 6750 XT, and RX 6950 XT Pure have a different blade design but the entire replacement process is the same.
  • Only the RX 6800 XT SE, RX 6900 XT SE, RX 6950 XT, and RX 6950 XT Pure supports ARGB while the rest of the series does not.

필요한 것

  1. Sapphire Nitro+ RX 6800 XT SE Fan Replacement, ARGB Fans: 1 단계, 이미지 1개 중 1개

    • Unscrew the JIS000 screw securing the fan to the graphics card

    번역하기

  2. Sapphire Nitro+ RX 6800 XT SE Fan Replacement: 2 단계, 이미지 1개 중 1개

    • Lift the fan from the top and pull away from you.

    번역하기

  4. Sapphire Nitro+ RX 6800 XT SE Fan Replacement: 3 단계, 이미지 1개 중 1개

    • Clean any dust or residue present with a Q-tip damp with alcohol.

    번역하기

  5. Sapphire Nitro+ RX 6800 XT SE Fan Replacement: 4 단계, 이미지 1개 중 1개

    • Flip the fan over and notice the pins on the fan and in the graphics card fan slot:

    • Fan Pins

    • Fan slot

    • Flip the fan back over keeping the same orientation and carfully insert the fan.

    • If inserted incorrectly the pins could bend or break!

    번역하기

  6. Sapphire Nitro+ RX 6800 XT SE Fan Replacement: 5 단계, 이미지 1개 중 1개

    • Push the fan toward you to ensure that the pins are connected.

    번역하기

  7. Sapphire Nitro+ RX 6800 XT SE Fan Replacement: 6 단계, 이미지 1개 중 1개

    • Rescrew the JIS000 screw in the top of the fan.

    • Repeat steps 1 - 5 on the remaining fans if needed.

    • The center fan has a unique fan sicker to designate it as the middle.

    번역하기
결론

After assembly, the fans and RGB will work like new!

다른 한 분이 해당 안내서를 완성하였습니다.

작성자

1다른 기여자 명과 함께

Weston Wood

회원 가입일: 10/23/23

183 평판

안내서 1개를 작성함

배지: 4

배지 +1개 더

팀

CSU Los Angeles, Team 5-25, Kershman Fall 2023 CSU Los Angeles, Team 5-25, Kershman Fall 2023 회원

CSULA-KERSHMAN-F23S5G25

1 회원

안내서 1개 작성

댓글 2개

What is the Screw used for this? I am having trouble finding a "3mm JIS 000" screw when I look it up. I accidentally dropped the screw somewhere in the pc when taking out the fan.

Ethan Callaway - 답글

Hello, I'm trying to find the screw too! Did you find it by any chance where to get replacement?

Waleed Almutairi -

댓글 쓰기

조회 통계:

지난 24시간: 1

지난 7일: 7

지난 30일: 38

전체 시간: 817