소개
This guide for the Shark AI Ultra AV2511AE will show the steps needed to replace the vacuum bumper. This replacement is needed when the bumper has debris caught that causes the vacuum to make grinding noises or the vacuum is repeatedly running into the same object.
필요한 것
-
-
Orient the device upside-down.
-
Remove the six 8 mm screws from the bumper using a Torx TR9 screwdriver.
-
Remove the bumper.
-
-
결론
To reassemble your device, follow these instructions in reverse order.
팀
Utah Tech University, Team 1-3, McMurrin Fall 2023 Utah Tech University, Team 1-3, McMurrin Fall 2023 회원
UTAHTECH-MCMURRIN-F23S1G3
3 회원들
안내서 7개를 작성함
