소개
This guide for the Shark AI Ultra AV2511AE will show the steps needed to replace the smart vacuum filter. This filter is used to trap dirt into the filter, preventing small dirt particles from being released back into the air. This will need to be completed if the smart vacuum is not picking up and/or holding trash. It is recommended that these filters be replaced or clean every couple of months to improve vacuum suction.
-
-
Flip the vacuum upside-down.
-
Pinch and pull out the filter cartridge.
-
Remove the filter.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
팀
Utah Tech University, Team 1-3, McMurrin Fall 2023 Utah Tech University, Team 1-3, McMurrin Fall 2023 회원
UTAHTECH-MCMURRIN-F23S1G3
3 회원들
안내서 7개 작성하였습니다
