소개
If your roller brush is clear of debris, but still won't rotate, the roller brush motor may need to be replaced. Follow these steps to remove the roller brush motor for replacement.
필요한 것
-
-
Lift the latches on both sides of the vacuum to release the dust canister.
-
Remove the dust canister from the vacuum by lifting it up.
-
-
-
-
Desolder the wires running to the motor from the motherboard. For details on how to desolder, visit this soldering guide.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
다른 3명이 해당 안내서를 완성하였습니다.