기기를 수리하세요 커뮤니티 상점

Slingbox SOLO DC Power Connector Replacement

소개

The purpose of this guide is to show the steps necessary to replace the faulty DC power connector.

필요한 것

  1. Slingbox SOLO DC Power Connector Replacement, Motherboard: 1 단계, 이미지 1/1

    • Use the plastic opening tool to remove the four rubber pads from the bottom of the device.

    편집

  2. Slingbox SOLO DC Power Connector Replacement: 2 단계, 이미지 1/3 Slingbox SOLO DC Power Connector Replacement: 2 단계, 이미지 2/3 Slingbox SOLO DC Power Connector Replacement: 2 단계, 이미지 3/3

    • The Slingbox has four black 5mm screws, one on each corner of the case.

    • Remove the four black 5mm screws using the PH1 screwdriver.

    • Gently pull and separate the two case covers.

    편집

  4. Slingbox SOLO DC Power Connector Replacement: 3 단계, 이미지 1/3 Slingbox SOLO DC Power Connector Replacement: 3 단계, 이미지 2/3 Slingbox SOLO DC Power Connector Replacement: 3 단계, 이미지 3/3

    • The motherboard has five silver 5.5mm screws connecting it to the base of the Slingbox.

    • Remove the five silver screws on the motherboard using the PH1 screwdriver.

    • Gently slide and separate the motherboard from the base.

    편집

  5. Slingbox SOLO DC Power Connector Replacement, DC Power Connector: 4 단계, 이미지 1/1

    • Do not touch the heated tip of the soldering iron.

    • Check this guide out to learn how to use a soldering iron.

    • Desolder all three lead prongs.

    • Gently pull the DC power connector from the motherboard.

    편집
결론

To reassemble your device, follow the instructions in reverse order.

작성자

다른 기여자 2명과 함께

Nitin Muralidhar

회원 가입일: 07/18/16

222 평판

안내서 2개 작성하였습니다

배지: 4

+1개 배지 추가

팀

IUPUI, Team 2-2, Harley SU 2016 IUPUI, Team 2-2, Harley SU 2016 회원

IUPUI-HARLEY-SU16S2G2

5 회원들

안내서 2개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 2

전체 시간: 278