기기를 수리하세요 커뮤니티 상점

Tivax MiTraveler 10Q-8 Battery Replacement

소개

First, you will have to refer to the back plate replacement guide. To replace the battery, be prepared to desolder two wires.

필요한 것

  1. Tivax MiTraveler 10Q-8 Battery Replacement, Rear Case: 1 단계, 이미지 1/2 Tivax MiTraveler 10Q-8 Battery Replacement, Rear Case: 1 단계, 이미지 2/2

    • With the device face down, slide the charging port cover off on the left side of device.

    편집

  2. Tivax MiTraveler 10Q-8 Battery Replacement: 2 단계, 이미지 1/1

    • Locate a Phillips 2.88mm screw at the charging port.

    편집

  3. Tivax MiTraveler 10Q-8 Battery Replacement: 3 단계, 이미지 1/1

    • Use a PH000 Philips head screwdriver to remove screw.

    • Remember lefty loosey, righty tighty

    편집

  4. Tivax MiTraveler 10Q-8 Battery Replacement: 4 단계, 이미지 1/1

    • To pry the back plate off, use the plastic opening tool between the back plate and front plate; start at the headphone jack.

    • Make sure the lip of the plastic opening tool is face up.

    편집

  5. Tivax MiTraveler 10Q-8 Battery Replacement: 5 단계, 이미지 1/2 Tivax MiTraveler 10Q-8 Battery Replacement: 5 단계, 이미지 2/2

    • Move around the device with the plastic opening tool, pushing down to release the back plate from clips.

    • You will hear popping sounds when you work around the device.

    편집

  6. Tivax MiTraveler 10Q-8 Battery Replacement: 6 단계, 이미지 1/2 Tivax MiTraveler 10Q-8 Battery Replacement: 6 단계, 이미지 2/2

    • Once you’ve moved around the whole device with the plastic opening tool, the back plate will completely release from the rest of the device.

    편집

  7. Tivax MiTraveler 10Q-8 Battery Replacement, Battery: 7 단계, 이미지 1/1

    • The battery rests flat on the inside surface of the tablet. It is a rectangular shape and has blue and yellow tape.

    편집

  8. Tivax MiTraveler 10Q-8 Battery Replacement: 8 단계, 이미지 1/1

    • Two wires, one red and one black, which run from the motherboard to the battery, need to be desoldered from the motherboard.

    • Review how to solder here.

    편집

  9. Tivax MiTraveler 10Q-8 Battery Replacement: 9 단계, 이미지 1/2 Tivax MiTraveler 10Q-8 Battery Replacement: 9 단계, 이미지 2/2

    • Work the soldering gun on the red wire where it is connected to the motherboard. It should release from the motherboard.

    • Work the soldering gun on the black wire where it is connected to the motherboard. It will release from the motherboard.

    편집

  10. Tivax MiTraveler 10Q-8 Battery Replacement: 10 단계, 이미지 1/3 Tivax MiTraveler 10Q-8 Battery Replacement: 10 단계, 이미지 2/3 Tivax MiTraveler 10Q-8 Battery Replacement: 10 단계, 이미지 3/3

    • Once both wires have been desoldered, remove the battery from the device.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 4명과 함께

Maria

회원 가입일: 03/16/15

210 평판

안내서 2개 작성하였습니다

배지: 7

배지 +4개 더

팀

Colorado Springs, Team 4-3, Panko Spring 2015 Colorado Springs, Team 4-3, Panko Spring 2015 회원

UCCS-PANKO-S15S4G3

3 회원들

안내서 10개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 2

30일 전: 3

전체 시간: 831