물건을 수리하세요 커뮤니티 상점

Wacker Compactor Plate VP1550AW 2014 V-Belt Replacement

소개

Follow this guide to remove the drive belt for the Wacker Compactor Plate VP1550AW 2014.

필요한 것

  1. Wacker Compactor Plate VP1550AW 2014 V-Belt Replacement, Safety precautions: 1 단계, 이미지 2개 중 1개 Wacker Compactor Plate VP1550AW 2014 V-Belt Replacement, Safety precautions: 1 단계, 이미지 2개 중 2개

    • Before you begin, be sure that the engine is powered off and is cool to the touch.

    • Grab the plastic housing at the end of the spark plug wire.

    • Pull firmly to disconnect the wire from the spark plug.

    편집

  2. Wacker Compactor Plate VP1550AW 2014 V-Belt Replacement, Loosen the belt guard: 2 단계, 이미지 1개 중 1개

    • Use a 1/2" socket and wrench to loosen the two bolts securing the belt guard.

    • The bolts are captive and should not be removed.

    편집

  4. Wacker Compactor Plate VP1550AW 2014 V-Belt Replacement, Remove the belt guard: 3 단계, 이미지 2개 중 1개 Wacker Compactor Plate VP1550AW 2014 V-Belt Replacement, Remove the belt guard: 3 단계, 이미지 2개 중 2개

    • Remove the belt guard.

    편집

  5. Wacker Compactor Plate VP1550AW 2014 V-Belt Replacement, Remove the drive belt: 4 단계, 이미지 3개 중 1개 Wacker Compactor Plate VP1550AW 2014 V-Belt Replacement, Remove the drive belt: 4 단계, 이미지 3개 중 2개 Wacker Compactor Plate VP1550AW 2014 V-Belt Replacement, Remove the drive belt: 4 단계, 이미지 3개 중 3개

    • Use scissors or a blade to cut the drive belt.

    • Remove the drive belt.

    편집

  6. Wacker Compactor Plate VP1550AW 2014 V-Belt Replacement, Install a replacement belt: 5 단계, 이미지 1개 중 1개

    • Loop the replacement belt onto the small pulley.

    편집

  7. Wacker Compactor Plate VP1550AW 2014 V-Belt Replacement: 6 단계, 이미지 3개 중 1개 Wacker Compactor Plate VP1550AW 2014 V-Belt Replacement: 6 단계, 이미지 3개 중 2개 Wacker Compactor Plate VP1550AW 2014 V-Belt Replacement: 6 단계, 이미지 3개 중 3개

    • Replacing the belt poses a substantial pinching hazard. Wear safety gloves and be mindful where you position your fingers.

    • Guide the belt over the top of the clutch pulley.

    • Loop the belt underneath the pulley axle.

    • Rotate the pulley slowly and guide the built into the groove.

    • Getting the replacement belt back onto the drive pulley requires considerable strength.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

작성자

1다른 기여자 명과 함께

Arthur Shi

회원 가입일: 01/03/18

313,317 평판

안내서 729개를 작성함

배지: 47

배지 +44개 더

팀

iFixit iFixit 회원

Staff

123 회원들

안내서 23,725개를 작성함

0가이드 댓글

댓글 쓰기

조회 통계:

지난 24시간: 3

지난 7일: 6

지난 30일: 32

전체 시간: 3,684