주요 콘텐츠로 건너뛰기

Zoomer Dino Boomer Nose Sensor Replacement

필요한 것

  1. Zoomer Dino Boomer Nose Sensor Replacement, Nose Sensor: 1 단계, 이미지 1/2 Zoomer Dino Boomer Nose Sensor Replacement, Nose Sensor: 1 단계, 이미지 2/2
    • Unscrew the two 7.5 mm Phillips #0 screws at the base of the neck.

    • Remove the two 7.2 mm Phillips #0 screws above these at the base of the mouth.

  2. Zoomer Dino Boomer Nose Sensor Replacement: 2 단계, 이미지 1/2 Zoomer Dino Boomer Nose Sensor Replacement: 2 단계, 이미지 2/2
    • Use the spudger to pry Zoomer Dino Boomer's lower jaw from its mouth.

  3. Zoomer Dino Boomer Nose Sensor Replacement: 3 단계, 이미지 1/2 Zoomer Dino Boomer Nose Sensor Replacement: 3 단계, 이미지 2/2
    • Remove the roof of Zoomer Dino Boomer's mouth by unscrewing the 7.5 mm Phillips #0 screw.

  4. Zoomer Dino Boomer Nose Sensor Replacement: 4 단계, 이미지 1/2 Zoomer Dino Boomer Nose Sensor Replacement: 4 단계, 이미지 2/2
    • Carefully push the sensors out of the nose socket with your fingers.

  5. Zoomer Dino Boomer Nose Sensor Replacement: 5 단계, 이미지 1/3 Zoomer Dino Boomer Nose Sensor Replacement: 5 단계, 이미지 2/3 Zoomer Dino Boomer Nose Sensor Replacement: 5 단계, 이미지 3/3
    • Use a soldering iron to remove the wires from the sensor chip by melting the metal joints on the chip.

    • Use the tweezers to remove the wires as you are soldering them.

    • Do not touch any parts of Zoomer Dino Boomer or yourself when using the soldering iron. The soldering iron will be very hot.

    • When reassembling, extra solder may be required to reconnect the wires with the circuit board.

  6. Zoomer Dino Boomer Nose Sensor Replacement: 6 단계, 이미지 1/1
    • Remove and replace the nose sensor.

결론

To reassemble your device, follow these instructions in reverse order.

Lauren Mannix

회원 가입일: 08/29/15

398 평판

안내서 3개 작성하였습니다

USF Tampa, Team 16-1, Wollert Fall 2015 USF Tampa, Team 16-1, Wollert Fall 2015 회원

USFT-WOLLERT-F15S16G1

3 회원들

안내서 10개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 7

전체 시간: 1,328