물건을 수리하세요 커뮤니티 상점

이 단계의 변경 사항

편집자 Dominik Schnabelrauch-

편집 승인됨 완료자 Dominik Schnabelrauch

이전
이후
변경 사항 없음

단계 라인

-[* black] Remove the liquid indicator sticker with a tweezer.
-[* red] Use a #000 Phillips screwdriver to remove the screw, that holds down the metal shield, which covers the flex cables on the motherboard.
-[* black] To remove the metal shield — use one finger to hold down the connection to the clamp on the motherboard and use a Spudger to lift the middle of it upwards at the same time.
- [* icon_caution] The metal shield is tightly held in its place. If you try to remove it without pressing it down on one side, it'll break easily.
+[* black] Remove the liquid indicator sticker.
+[* red] Remove the Phillips #000 screw that holds down the metal shield.
+[* icon_caution] The metal shield is tightly held in its place. If you try to remove it without holding it down on one side, it'll break easily.
+[* black] Remove the metal shield.