#4단계의 변경 사항
편집자 Jeff Suovanen-
편집 승인됨 완료자 Jeff Suovanen
- 이전
- 이후
- 변경 사항 없음
단계 라인
| [* black] Slide each RAM module straight out to remove it. | |
| [* icon_caution] When handling the RAM module, touch only the outside edges. Take care not to touch the gold-colored contact points along the bottom edge. | |
| - | [* icon_reminder] To install a new RAM module, make sure it's oriented correctly and the notch on the bottom is aligned, and then slide it in at about the same angle |
| + | [* icon_reminder] To install a new RAM module, make sure it's oriented correctly and the notch on the bottom is aligned, and then slide it in at about the same angle. Press evenly until it clicks into place and the gold contacts are no longer visible. |
| [* icon_reminder] Then, spread the clips apart with one hand, and with the other press to angle the top edge of both RAM modules down toward the logic board simultaneously. | |
| [* black] Release the clips and make sure the RAM modules are secure. |