#2단계의 변경 사항
편집 승인됨 완료자 Dominik Schnabelrauch
- 이전
- 이후
- 변경 사항 없음
단계 라인
| - | [* black] Insert wisdom here. |
|---|---|
| + | [* black] Secure a suction handle to the bottom of the back cover, as close to the edge as possible. |
| + | [* icon_note] If the phone's rear glass is cracked, the suction handle may not stick. Try [https://d3nevzfk7ii3be.cloudfront.net/igi/4MmKE22Cy2MavVZU|lifting it with strong tape|new_window=true], or superglue the suction handle in place and allow it to cure so you can proceed. |
| + | [* black] Lift the back cover with the suction handle to create a small gap between the cover and the frame. |
| + | [* black] Insert an opening pick into the gap. |
| + | [* icon_note] If you have trouble, apply more heat to further soften the adhesive. Follow the iOpener instructions to avoid overheating. |
| + | [* black] Slide the opening pick to the bottom right corner. |