iBook G3 14" Upper Case Replacement 단계 #4 기록

#4단계의 변경 사항

편집자 Walter Galan- 2010년 11월 22일

	[* icon_note] This is a diagram of the ribbon clamp connectors you will disconnect in the next step.
-	[* black] 1) With your fingernails, grasp the locking bar on either side and pull up a small amount (about 1/16" or 2 mm).
-	[* black] 2) After disengaging the locking bar, slide the cable out of the connector.
+	[* black] With your fingernails, grasp the locking bar on either side and pull up a small amount (about 1/16" or 2 mm).
+	[* black] After disengaging the locking bar, slide the cable out of the connector.