#3단계의 변경 사항
단계 라인
| + | [title] Disconnect USB-C cable from board |
|---|---|
| + | [* black] With the retention ring off, you can advance the cable molding into the housing, and the entire camera subframe assembly should freely disengage from the outer shell. |
| + | [* icon_caution] The cable's connection to the board is two-fold: unscrew the single grounding cable, then disengage the white plug by squeezing the wide surfaces with your thumb and forefinger then gently pulling outward. |
| + | [* black] The entire cable may then be pulled outward, through the outer housing/shell port where the cable retention clip was fastened. (The white plug can be slightly manipulated to fit through.) |
이미지 1
이전 이미지 없음
추가
이미지 2
이전 이미지 없음
추가