#1단계의 변경 사항
편집 승인됨 완료자 Dominik Schnabelrauch
- 이전
- 이후
- 변경 사항 없음
단계 라인
| + | [title] Release the plastic clips |
|---|---|
| + | [* black] Before beginning any repairs, turn off your headphones. |
| + | [* icon_note] The earcup cushions of the Sony WH-1000XM3 are held in place by small plastic clips and it's the same removal procedure for both, the left and the right cushion. |
| + | [* icon_note] In case you want to replace the battery you're required to remove the ***RIGHT*** earcup cushion. |
| + | [* black] Insert a spudger into the gap between earcup cushion and the earcup frame. |
| + | [* icon_note] A screwdriver or a flat pencil will also do the job but might scratch your headphone housing or damage the cushions. |
| + | [* black] Pry up the earcup cushion by tilting the spudger downwards to release the plastic clips. |
| + | [* black] Repeat the previous step around the perimeter of the ear cup cushion to disconnect the remaining clips. |
이미지 1
이전 이미지 없음
추가
이미지 2
이전 이미지 없음
추가
이미지 3
이전 이미지 없음
추가