#1단계의 변경 사항
편집자 Walter Galan-
편집 승인됨 완료자 Walter Galan
- 이전
- 이후
- 변경 사항 없음
단계 라인
| [* icon_caution] In this step you will disconnect the battery to help avoid shorting out any components during service. | |
| [* black] Use the flat end of a spudger to pry both short sides of the battery connector upward to disconnect it from its socket on the logic board. | |
| - | [* black] Bend the battery cable slightly away from the logic board so the connector will not accidentally contact its socket. |
| + | [* black] Bend the battery cable slightly away from the logic board so the connector will not accidentally bend back and make contact with its socket. |