#15단계의 변경 사항
편집자 Jeff Suovanen-
편집 승인됨 완료자 Jeff Suovanen
- 이전
- 이후
- 변경 사항 없음
단계 라인
| - | [* black] Use a plastic opening tool to disconnect the LCD cable connector. |
|---|---|
| + | [* icon_caution] Make sure the battery is disconnected before you disconnect or reconnect the cables in this step. |
| + | [* black] Use a plastic opening tool or a fingernail to disconnect the LCD cable connector. |
| [* icon_caution] The LCD and Digitizer connectors are on the same cable assembly, so prying the LCD connector up should disconnect both connectors. Double check that the two cables are fully disconnected before removing the display. | |
| [* icon_reminder] When reassembling your phone, the LCD cable may pop off its connector. A blank screen, or white lines on the display could be caused by a loose connection. Should this happen, reconnect the cable and power cycle your phone. The best way to power cycle your phone is to disconnect and reconnect the battery. |