물건을 수리하세요 커뮤니티 상점

#1단계의 변경 사항

편집자 Evan Roberts-

편집 승인됨 완료자 Evan Roberts

이전
이후
변경 사항 없음

단계 라인

[title] Eyepiece
[* icon_note] Use a Phillips #000 Precision Screwdriver for all of the following steps.
-[* red] Remove both 4.5 mm screws holding the bottom into place.
-[* orange] Remove both 4.5 mm screws holding the side into place.
-[* yellow] Remove the 4.5 mm screw underneath the A/V flap.
-[* green] Remove the 4.0 mm screw on the left-side wrist strap loop.
+[* red] On the bottom side of the camera, unscrew both 4.5 mm screws holding the bottom into place, per image 1.
+[* orange] On the right side of the camera, unscrew both 4.5 mm screws holding the side into place, per image 2.
+[* yellow] On the right side of the camera, unscrew the 4.5 mm screw underneath the A/V flap, per image 2.
+[* green] On the top side of the camera, unscrew the 4.0 mm screw on the left-side wrist strap loop, per image 3.