#8단계의 변경 사항
편집자 Matt Bothell-
편집 승인됨 완료자 Jeff Suovanen
- 이전
- 이후
- 변경 사항 없음
단계 라인
| - | [* red] Remove two 6 mm J000 screws from behind the eyepiece cover. |
|---|---|
| + | [* red] Remove two 6 mm J000 screws from behind the eyepiece cover. On D7100 models there is an additional screw holding the back plate on. This screw is located in the diopter (dial with + - on it). This screw can be accessed by peeling up this sticker on the diopter. |