MacBook Air 11" Mid 2011 Battery Replacement 단계 #3 기록

#3단계의 변경 사항

편집자 Jeff Suovanen- 2019년 4월 16일

편집 승인됨 완료자 Jeff Suovanen

	[* icon_caution] When handling the battery, avoid squeezing or touching the six exposed lithium polymer cells.
	[* black] Lift the battery from its edge nearest the logic board and remove it from the upper case.
-	[* icon_reminder] If you're installing a new battery, you should calibrate it after installation:
+	[* icon_reminder] If you're installing a new battery, you should [[Battery Calibration\|calibrate]] it after installation:
	[* black] Charge it to 100%, and then keep charging it for at least 2 more hours. Next, unplug and use it normally to drain the battery. When you see the low battery warning, save your work, and keep your laptop on until it goes to sleep due to low battery. Wait at least 5 hours, then charge your laptop uninterrupted to 100%.
	[* black] If you notice any unusual behavior or problems after installing your new battery, you may need to [https://support.apple.com/en-gb/HT201295\|reset your MacBook's SMC\|new_window=true].